Your engine needs oil for proper functioning. A regular oil change can extend the life
of your 2020 Chevy Blazer.
Oil helps lubricate moving parts in an engine while decreasing heat emissions and
keeping dirt out. If it’s time for an oil change, follow these steps:
Synthetic Oil
Oil type plays a large part in keeping your engine healthy. Synthetic motor oils may
be worth investing in if you regularly drive in harsh conditions; these specialty oils
resist breaking down in high temperatures while simultaneously improving efficiency of oil filters.
Climate and driving habits may also have an effect on your engine’s lifespan;
depending on these elements, a synthetic blend or conventional oil might be more
suitable than full synthetic motor oil for optimal engine health.
Coggin Chevrolet at the Avenues offers an array of motor oil choices for your 2020
Chevy Blazer. Our high mileage oil is specially formulated to reduce engine wear,
limit leaks and spills, decrease smoke emissions from older engines and decrease
leaks and spills. In addition, full synthetic motor oil provides maximum engine
protection; being developed in laboratories by chemical compounds it boasts
benefits not found with conventional oils such as increased viscosity index and
resistance against oxidation thermal breakdown.
High Mileage Oil
As vehicles that have over 75,000 miles on them age, it can become more
challenging for engines to run optimally. High mileage motor oil has been
specifically developed to aid these engines by reducing risk of metal-on-metal
contact, cleaning sludge more effectively, increasing fuel efficiency, and also
including seal swelling agents to prevent oil leakage or gasket wear deterioration.
Oil comes in various viscosities; to select the appropriate viscosity for your vehicle,
always refer to your owner’s manual. Failing to do so could void your powertrain
warranty. Furthermore, changing oil regularly helps prevent engine damage as well
as provide technicians with an opportunity to detect issues like worn brake pads or
weak batteries that might arise under the hood – the more often your oil changes
occur the longer will your engine last!
Oil Filter
An oil filter is essential to keeping your engine running smoothly, filtering out
impurities like metallic particles and sludge from your oil, helping protect your
engine against potential wear-and-tear damages and costly repairs. A high-quality
filter may even prevent premature wear and damage to help ensure smooth engine operation.
Your car’s best oil type and filter choice depends on several factors, including its
engine and driving conditions. Please refer to your owner’s manual for guidance,
then pick one specifically tailored to your vehicle.
Oil changes are one of the most essential maintenance services you can perform to
keep your Blazer in good condition and increase its resale value. Don’t wait until
your check engine light illuminates or you hear grumbling coming from within –
schedule one now using our online scheduler! You’ll find your nearest service center here!
Oil Change Intervals
Modern engines are built to last much longer between oil changes than in years
past, yet it remains important that regular changes take place for your engine
health and vehicle resale value.
At minimum, it is advised that you change the oil in your Chevrolet Blazer every
7,500 miles for synthetic oil and 10,500 for conventional oil. Depending on driving
habits and climate conditions, more frequent oil changes may be necessary – please
refer to your owner’s manual to determine what works best in your specific case.
Always wear safety glasses and use jack stands when working underneath your car –
no risking dropping a wrench and damaging its engine! Also don’t forget your oil
filter! It helps prevent dirt, abrasive materials, and heat damage by filtering out of
your oil supply, protecting against costly repairs down the line. Changing oil
regularly could save time and money later!